Steen, skribent på ROSENSTAND

Guide: Choose the right engineer for your project

Stone 28. February 2024 No Comments

If you need to use a lot of resources quickly, want direct access to decision-makers, or are looking for the cheapest solution, these are some of the considerations you need to make.

Hand sketches are still relevant – even if you draw badly

Stone 28. February 2024 No Comments

The many CAD programs have given the classic hand drawing a run for its money, but sketches are still relevant. They can do something entirely different than the computer.

This is why your project is going off track

Stone 28. February 2024 No Comments

It is both expensive and frustrating when your project goes wrong. Learn more about typical mistakes and discover how to minimise the risk by undertaking a good preliminary project.

7 typical mistakes when your machine needs CE marking

Stone 22. February 2024 No Comments

We are taking a closer look at everything from construction errors in your machine to things that can cause the CE mark to be revoked from an already approved machine.

Working drawings – how to avoid costly mistakes

Stone 22. February 2024 No Comments

There are three things in particular you need to pay attention to when preparing your working drawing. When you include them in the process, you simultaneously minimise the risk of the most common blunders.

4 quality requirements that the mechanical engineer and the carpenter have in common

Stone 22. February 2024 No Comments

Essentially, engineering is a craft. When assessing the quality of an engineer, it is beneficial to look at four parameters that apply to both the carpenter and the mechanical engineer.

3 important benefits of FE simulations

Stone 21. February 2024 No Comments

It is visible on both the financial and sustainable bottom line when you switch from manual calculations to 3D simulations – and you even get an extra bonus on top of that.

The most surprising mistake when developing new climbing gear

Stone 21. February 2024 No Comments

You might think the calculations are the biggest risk of error, but actually, the biggest challenge lies right at the start of the development process.

Author: Stone